Master Pipe / Line Sizing As a Process Engineer

Master Pipe / Line Sizing As a Process Engineer
Started by OneDDL

Subskrybuj ten wątek

Rate this topic

0 głosów - średnia: 0
1
2
3
4
5

0 posts in this topic

OneDDL
Młody Senior

0
543 posts

5 godzin(y) temu -

[Obrazek: 76cbb5aa8a0c9b2537b4877964573030.avif]

Free Download Master Pipe / Line Sizing As a Process Engineer
Last updated 1/2025
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Language: English | Duration: 2h 2m | Size: 1.12 GB
Understand how a process engineer should choose the suitable line size for a fluid in a chemical or oil and gas plant

What you'll learn
Learn how to calculate the main parameters used for pipe sizing for liquid, gas and two phase flow
Know the common velocity criteria used for judging a pipe size for different fluid services
Know the common pressure drop criteria used for judging a pipe size for different fluid services
See how two phase flow regimes affect the pipe
See some examples of choosing the suitable pipe size and how the chosen criteria affects the pipe diameter
Requirements
Basics of fluid mechanics
Description
Pipe sizing is one of the first major activities a process engineer carries out during the preparation of the P&ID.Pipe size is an important factor for a well-designed process. It shall affect fluid velocity, pressure drop, flow regime,.etc.A poorly sized pipe can cause disturbance to the whole process and may lead to plant shutdown in critical cases.Pipe size also has a lot to do with cost, oversizing a pipe means extra cost, more complex pipe design, more foundation, even sometimes process issues.In this course, you'll learn how to choose the correct pipe size that works with the corresponding fluid service and compare it with the main criteria which are:VelocityPressure dropTwo-phase flow regime criteria.Through this course, we shall see: How to calculate the velocity and pressure drop of a fluid in the pipe. Then after calculating the parameters, we'll see the expected criteria range for each service, so that we can compare them with our calculated parameters.We'll see also what are the two-phase flow regimes and how we should deal with them.Finally, I'll give some examples for pipe sizing. This shall include an Excel sheet that can give guidance on how to size pipes in the future.So cannot wait to see you in the course, and I hope it shall give you added value.Disclaimer: Please note that the Excel sheets were made just for educational purposes. If you shall use it to validate a process or purchase equipment or piping, then you should validate it yourself, and using it shall be upon your sole responsibility.
Who this course is for
Engineers who want to understand the main basis for pipe sizing
Chemical Engineering Graduates or undergraduates
Homepage

Kod:
https://www.udemy.com/course/pipe-sizing-in-process-plants/

Quote

Pokaż wersję do druku

Skocz do:

Użytkownicy przeglądający ten wątek: 1 gości